LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2014 >> Lancer Evolution GSR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Basic Brake System - Lancer) >> Front Disc Brake Assembly >> Disassembly And Assembly < 16-Inch Front Disc Brake (RALLIART) > >> Disassembly Service Point >> << B >> Piston Seal Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<< B >> Piston Seal Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: Do not use a flat-tipped screwdriver or similar tool to remove the piston seal. These may damage the inner side of the cylinder.
  1. Remove the piston seal with your finger tip.
  2. Clean the piston surface and cylinder inner face with alcohol or specified brake fluid.

    Brake fluid: DOT 3 or DOT 4 

    Fig 1: Removing Piston And Piston Boot
    G05904697Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Removing Piston Seal
    G05904698Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.