Service Specifications
WARNING: This page is about a different variant/trim than selected.
| Item | Standard value | Limit | ||
|---|---|---|---|---|
| Brake pedal height mm (in) | 219.8 - 227.8 (8.7 - 9.0) | - | ||
| Dimension from the brake booster stud bolt end to the clevis hole center mm (in) | 75.8 - 80.2 (2.98 - 3.16) | - | ||
| Brake pedal free play mm (in) | 3 - 8 (0.12 - 0.31) | - | ||
| Pedal-to-floor clearance when brake pedal is depressed mm (in) [Pedal depression force: approx. 500 N (112.4 lb)] | 85 (3.35) or more | - | ||
| Brake pedal distortion mm | Distance from the pedal pad surface to the level surface | M/T | 237 - 245 (9.3 - 9.6) | - |
| CVT, TC-SST | 240 - 248 (9.4 - 9.8) | - | ||
| Fluid pressure generated by brake booster non-servo effect test kPa (psi) | Except RALLIART | Pedal depression force: 100 N (22.5 lb) | 0 - 600 (0 - 87) | - |
| Pedal depression force: 300 N (67.4 lb) | 1, 030 - 2, 220 (149 - 322) | - | ||
| RALLIART | Pedal depression force: 100 N (22.5 lb) | 0 - 520 (0 - 75) | - | |
| Pedal depression force: 300 N (67.4 lb) | 890 - 1, 910 (129 - 277) | - | ||
| Fluid pressure generated by brake booster servo effect test kPa (psi) | Except RALLIART | Pedal depression force: 100 N (22.5 lb) | 5, 430 - 7, 050 (787 - 1, 022) | - |
| Pedal depression force: 300 N (67.4 lb) | 10, 370 - 11, 560 (1, 504 - 1, 676) | - | ||
| RALLIART | Pedal depression force: 100 N (22.5 lb) | 4, 430 - 5, 850 (642 - 848) | - | |
| Pedal depression force: 300 N (67.4 lb) | 8, 950 - 9, 970 (1, 298 - 1, 446) | - | ||
| Front disc brake | Brake pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) | |
| Brake disc thickness mm (in) | Except RALLIART | 26.0 (1.02) | 24.4 (0.96) | |
| RALLIART | 24.0 (0.94) | 22.4 (0.88) | ||
| Brake disc run-out mm (in) | - | 0.06 (0.0024) | ||
| Brake drag force N (lb) | Except RALLIART | 68 (15.3) or less | - | |
| RALLIART | 85 (19.1) or less | - | ||
| Rear disc brake | Brake pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) | |
| Brake disc thickness mm (in) | 10.0 (0.39) | 8.4 (0.33) | ||
| Brake disc run-out mm (in) | - | 0.08 (0.0032) | ||
| Brake drag force N (lb) | 68 (15.3) or less | - | ||
| Rear drum brake | Brake lining thickness mm (in) | 4.0 (0.16) | 1.0 (0.04) | |
| Brake drum inside diameter mm (in) | 203 (8.0) | 205 (8.1) | ||