Cruise Control Systems
- General Information
- Cruise Control System Diagnosis
- Introduction To Cruise Control System Diagnosis
- Diagnostic Troubleshooting Strategy
- Diagnostic Function
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: When the Brake Pedal is Depressed, Cruise Control is not Cancelled
- Inspection Procedure 2: When the Clutch Pedal is Depressed, Cruise Control is not Cancelled (M/T)
- Inspection Procedure 3: When the Selector Lever is Moved to "N" Position, Cruise Control is not Cancelled (CVT)
- Inspection Procedure 4: When the "CANCEL" Switch is Set to ON, Cruise Control System is not Cancelled
- Inspection Procedure 5: Cruise Control cannot be Set (No Response "SET-" Switch and "RES+" Switch is Pressed.)
- Inspection Procedure 6: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed (M/T)
- Inspection Procedure 7: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed (CVT)
- Inspection Procedure 8: When "CRUISE ON/OFF" Switch is Turned ON, "CRUISE" Indicator Light Inside Combination Meter does not Illuminate (However, Cruise Control System is Normal)
- Inspection Procedure 9: When The Cruise Control Switch is Operated, The System is not Turned ON
- Data List Reference Table
- ECM Terminal Voltage Reference Chart For Cruise Control System Operation
- Special Tools
- On-Vehicle Service
- Cruise Control Switch