LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2018 >> Eclipse Cross LE >> Repair and Diagnosis (Single Page) >> General Information >> OEM General Information >> General >> How To Use Troubleshooting/Inspection Service Points >> Permutation Table In Scan Tool (M.U.T.-IIISE) System Names
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Permutation Table In Scan Tool (M.U.T.-IIISE) System Names

Scan tool (M.U.T.-IIISE) system names are replaced with each ECU and sensor mentioned in the table shown below.

Indicates scan tool (M.U.T.-IIISE) display ECU or sensor Indicates scan tool (M.U.T.-IIISE) display ECU or sensor
ETACS ETACS-ECU Meter Combination meter
SRS-AIR BAG SRS-ECU ECPS/4WS EPS-ECU
Steering Angle Sensor Steering wheel sensor F.A.S.T./OSS/IMMO/Keyl ess KOS & OSS-ECU <Vehicles with KOS> or ETACS-ECU <Vehicles without KOS>
ABS/ASC/ASTC/WSS ASC-ECU MFI Engine control module (ECM)
TPMS KOS & OSS-ECU <Vehicles with KOS> or ETACS-ECU <Vehicles without KOS> AUDIO Multivision display <Vehicles with smartphone link display audio>
EPB Electric parking brake ECU ELC-AT/CVT/TC-SST Transaxle control module (TCM)
Multi Around Monitor Camera-ECU ACC/FCM ACC/FCM-ECU
Air conditioner A/C controller assembly OCM Occupant classification-ECU
AWC AWC-ECU BSW BSW-ECU (master)
FCM/LDW/AHB FCM/LDW/AHB-ECU BSW (SUB) BSW-ECU (slave)
HUD Head Up Display (HUD) Gateway Gateway-ECU
LIN ETACS-ECU TCU Telematics control unit (TCU)