How To Connect The Scan Tool (M.U.T.-III)

Required Special Tools:

MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite main harness A
MB992747: V.C.I.-Lite USB cable short
MB992748: V.C.I.-Lite USB cable long

CAUTION: To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-IIISE).

Ensure that the ignition switch is at the "LOCK" (OFF) position.
Start up the personal computer.
Connect special tool MB992747/M992748 to special tool MB992744 and the personal computer.
Connect special tool MB992745 to special tool MB992744.
Connect special tool MB992745 to the data link connector.
NOTE: When the special tool MB992745 is connected to the data link connector, the special tool MB992744 indicator light will be illuminated in a green color.
Start the M.U.T.-IIISE system on the personal computer.
NOTE: Disconnecting scan tool (M.U.T.-IIISE) is the reverse of the connecting sequence, making sure that the ignition switch is at the "LOCK" (OFF) position.

Fig 1: Brake Pedal And Connector Terminals
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Connecting Special Tool MB992745 To Data Link Connector
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.