DTC C1219: Steering Wheel Sensor System (Faulty Signal): Notes
CAUTION:
- If there is any problem in the CAN bus lines, an incorrect DTC may be set. Prior to this diagnosis, diagnose the CAN bus lines .
- Whenever the ECU is replaced, ensure that the CAN bus lines are normal .
- When the steering wheel sensor is replaced, calibrate the steering wheel sensor (Refer to STEERING WHEEL SENSOR CALIBRATION ), and reset the steering wheel sensor correction amount set in the AWC-ECU (Item No. 1: Steering angle adjusted value SPECIAL FUNCTION ).
- When hydraulic unit (integrated with G and yaw rate sensor) is replaced, calibrate G and yaw rate sensor (Refer to G AND YAW RATE SENSOR CALIBRATION )