Transfer Oil Change <AWD>

Remove the drain plug and gasket, to drain the transfer oil.
Install the drain plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb)
Remove the filler plug and gasket, and fill the transfer oil up to the lower edge of the filler plug hole.
Transfer oil: Mitsubishi Motors Genuine Super Hypoid Gear Oil API GL-5 SAE80

Filling amount: 0.47 dm ³ (0.50 quarts)
Install the filler plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.