Continuously Variable Transaxle (CVT) (With Diagnostics)

• Service Precautions
• General Information
  • Specifications
  • System Configuration
  • Overview
  • Description Of Structure And Operation
    • Sectional View
  • Hydraulic Control System
    • Control Description
  • General Information Regarding The Main Components
  • Shift Mechanism
    • Pulley Ratio
  • Line Pressure Control And Secondary Pressure Control
  • Lock-Up Control
  • Select Control
  • Control Elements And Input/Output
  • Fail-Safe Function
  • Protection Control
    • General
    • Control During Wheel Spinning
    • Control At High Fluid Temperature
    • Torque Reduction When The Vehicle Is Reversing
    • Reversing Prevention
• Service Specifications
• Lubricants
• Sealants
• Diagnosis
  • Diagnostic Troubleshooting Flow
  • Introduction To CVT Diagnosis
  • CVT Diagnostic Troubleshooting Strategy
  • Diagnostic Function
    • Warning Indicator
    • On-Board Diagnostics
    • How To Connect The Scan Tool (M.U.T.-III)
    • How To Read And Erase Diagnostic Trouble Codes
    • HOW TO READ DATA LIST Required Special
    • How To Diagnose The Can Bus Lines
  • Freeze Frame Data Reference Table
    • Notes
    • Freeze Frame Data
  • Initialization Procedure For CVT Learned Value
    • Purpose
    • Initialization Procedure
  • Learning Procedure
    • Notes
    • When Replacing The TCM
    • When Replacing The CVT Assembly
    • When Replacing The Valve Body Assembly
  • Fluid Deterioration Level Erasing Procedure
  • Road Test
  • Torque Converter Stall Test
    • Notes
    • Judgment Of Torque Converter Stall Test Results
  • Hydraulic Pressure Test
    • Notes
    • Standard Hydraulic Pressure Table
    • Hydraulic Pressure Test Diagnosis Table
  • Ratio Pattern
    • D Range
    • Sport Mode
  • Torque Converter Clutch Operation Zone
  • Diagnostic Trouble Code Chart
  • Diagnostic Trouble Code Procedures
    • DTC P0703: Malfunction Of Stoplight Switch
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0705: Malfunction Of Transmission Range Switch
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence-Input Other Rationality)
      • Logic Flow Charts (Monitor Sequence-Input Open Circuit)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0711: Malfunction Of Transmission Fluid Temperature Sensor (Abnormality In Transmission Fluid Temperature Sensor Function)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Set In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0712: Malfunction Of Transmission Fluid Temperature Sensor (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0713: Malfunction Of The Transmission Fluid Temperature Sensor (High Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0715: Malfunction Of Primary Pulley Speed Sensor
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence-Input Rationality-Low (Open/Low Revolution))
      • Logic Flow Charts (Monitor Sequence-Input Open Circuit)
      • Logic Flow Charts (Monitor Sequence-Input Other Rationality)
      • DTC Set Conditions
        • Check Conditions <Input Rationality-Low (Open/Low Revolution)>
        • Check Conditions <Input Open Circuit>
        • Check Conditions <Input Other Rationality>
        • Judgment Criteria <Input Rationality-Low (Open/Low Revolution)>
        • Judgment Criteria <Input Open Circuit>
        • Judgment Criteria <Input Other Rationality>
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0720: Malfunction Of Secondary Pulley Speed Sensor
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence-Input Rationality-Low (Open/Low Revolution))
      • Logic Flow Charts (Monitor Sequence-Input Open Circuit)
      • Logic Flow Charts (Monitor Sequence-Input Other Rationality)
      • DTC Set Conditions
        • Check Conditions <Input Rationality-Low (Open/Low Revolution)>
        • Check Conditions <Input Open Circuit>
        • Check Conditions <Input Other Rationality>
        • Judgment Criteria <Input Rationality-Low (Open/Low Revolution)>
        • Judgment Criteria <Input Open Circuit>
        • Judgment Criteria <Input Other Rationality>
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0730: Incorrect Gear Ratio
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0741: Abnormality In Lock-Up Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0776: Abnormality In Secondary Pressure Solenoid Valve Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence-Output Functional High)
      • Logic Flow Charts (Monitor Sequence-Output Functional Low)
      • DTC Set Conditions
        • Check Conditions <Output Functional High>
        • Check Conditions <Output Functional Low (Steady State)>
        • Check Conditions <Output Functional Low (Transient State)>
        • Judgment Criteria <Output Functional High>
        • Judgment Criteria <Output Functional Low (Steady State)>
        • Judgment Criteria <Output Functional Low (Transient State)>
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0815 Malfunction Of Paddle Shift Up Switch
      • Diagnostic Function
      • Judgment Criteria
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0816: Malfunction Of Paddle Shift Down Switch
      • Diagnostic Function
      • Judgment Criteria
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0826: Malfunction Of Shift Switch Assembly
      • Diagnostic Function
      • Judgment Criteria
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0842: Malfunction Of The Secondary Pressure Sensor (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0843: Malfunction Of The Secondary Pressure Sensor (High Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0847: Malfunction Of The Primary Pressure Sensor (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0848: Malfunction Of The Primary Pressure Sensor (High Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P084A: Abnormality In Primary Pressure Sensor Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P0962: Malfunction Of The Line Pressure Solenoid Valve (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0963: Malfunction Of The Line Pressure Solenoid Valve (Open)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0966: Malfunction Of The Secondary Pressure Solenoid Valve (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0967: Malfunction Of The Secondary Pressure Solenoid Valve (High Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0969: Abnormality In Primary Pressure Solenoid Valve Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence-Output Functional High)
      • Logic Flow Charts (Monitor Sequence-Output Functional Low)
      • DTC Set Conditions
        • Check Conditions <Output Functional High>
        • Check Conditions <Output Functional Low>
        • Judgment Criteria <Output Functional High>
        • Judgment Criteria <Output Functional Low>
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0970: Malfunction Of The Primary Pressure Solenoid Valve (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P0971: Malfunction Of The Primary Pressure Solenoid Valve (High Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P1607: Malfunction Of The System Power Supply (Low Voltage)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P1637: Malfunction Of Memory Backup
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Condition
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P1773: Malfunction Of Abs/ASC
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P1798: Malfunction Of G Sensor Signal
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC P2719: Abnormality In Select Pressure Solenoid Valve Function
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence-Output Functional High)
      • Logic Flow Charts (Monitor Sequence-Output Functional Low)
      • DTC Set Conditions
        • Check Conditions <Output Functional High>
        • Check Conditions <Output Functional Low>
        • Judgment Criteria <Output Functional High>
        • Judgment Criteria <Output Functional Low>
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P2720: Malfunction Of The Select Pressure Solenoid Valve (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P2721: Malfunction Of Select Pressure Solenoid Valve (High Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P2763: Malfunction Of The Lock-Up Solenoid Valve (High Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P2764: Malfunction Of The Lock-Up Solenoid Valve (Low Input)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC P2765: Malfunction Of Turbine Speed Sensor
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence-Input Rationality-Low (Open/Low Revolution))
      • Logic Flow Charts (Monitor Sequence-Input Open Circuit)
      • Logic Flow Charts (Monitor Sequence-Input Other Rationality)
      • DTC Set Conditions
        • Check Conditions <LNPUT Rationality-Low (Open/Low Revolution)>
        • Check Conditions <Input Open Circuit>
        • Check Conditions <Input Other Rationality>
        • Judgment Criteria <LNPUT Rationality-Low (Open/Low Revolution)>
        • Judgment Criteria <LNPUT Open Circuit>
        • Judgment Criteria <Input Other Rationality>
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
        • Required Special Tools
    • DTC U0001: Malfunction Of Can Communication Circuit (Bus Off)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0100: Can Time-Out Error (Engine)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0121: Can Time-Out Error (Abs/ASC)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0141: Can Time-Out Error (ETACS)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U0317: Can Time-Out Error (EPB)
      • Diagnostic Function
      • Descriptions Of Monitor Methods
      • Monitor Execution
      • Monitor Execution Conditions (Other Monitor And Sensor)
        • Other Monitor (There Is No Temporary DTC Stored In Memory For The Item Monitored Below)
        • Sensor (The Sensor Below Is Determined To Be Normal)
      • Logic Flow Charts (Monitor Sequence)
      • DTC Set Conditions
        • Check Conditions
        • Judgment Criteria
      • OBD-II Drive Cycle Pattern
      • Probable Causes
      • Diagnosis
    • DTC U1195: Coding Not Completed
      • Diagnostic Function
      • Judgment Criteria
      • Probable Causes
      • Diagnosis
    • DTC U1197: Coding Data Unavailable
      • Diagnostic Function
      • Judgment Criteria
      • Probable Causes
      • Diagnosis
    • DTC U1417: Wrong Coding Data Received
      • Diagnostic Function
      • Judgment Criteria
      • Probable Causes
      • Diagnosis
  • Trouble Symptom Diagnosis Chart
    • Notes
    • Trouble Symptom Chart
    • Possible Cause Chart
    • Data List Reference Table
  • TCM Terminal Voltage Table
  • Oscilloscope Inspection Procedures
  • Wave Pattern Sample
• Diagnosis
  • Troubleshooting Strategy
    • Notes
    • Precautions For Diagnosis
  • Indicator Check
  • Diagnosis Function
    • When The System Fails
    • When The S-AWC System Oil Is Too Hot
    • Fail-Safe Function
    • On-Board Diagnostics
    • How To Connect The Scan Tool (M.U.T.-IIISE)
    • How To Read And Erase Diagnostic Trouble Codes
    • How To Read Data List
    • How To Perform Actuator Test
    • How To Diagnose The Can Bus Lines
  • Freeze Frame Data Reference Table
    • Notes
    • Freeze Frame Data
  • Diagnostic Trouble Code Chart
  • Trouble Symptom Chart
  • Diagnostic Trouble Code Procedures
    • DTC C100A: Fl Wheel Speed Sensor System (Faulty Circuit); DTC C1015: Fr Wheel Speed Sensor System (Faulty Circuit); DTC C1020: RL Wheel Speed Sensor System (Faulty Circuit); DTC C102B: RR Wheel Speed Sensor System (Faulty Circuit)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1011: Fl Wheel Speed Sensor System (Faulty Signal); DTC C101C: Fr Wheel Speed Sensor System (Faulty Signal); DTC C1027: RL Wheel Speed Sensor System (Faulty Signal); DTC C1032: RR Wheel Speed Sensor System (Faulty Signal)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1014: Fl Wheel Speed Sensor System (Characteristics Abnormality); DTC C101F: Fr Wheel Speed Sensor System (Characteristics Abnormality); DTC C102A: RL Wheel Speed Sensor System (Characteristics Abnormality); DTC C1035: RR Wheel Speed Sensor System (Characteristics Abnormality)
      • Notes
      • Operation
      • DTC Set Condition
      • Probable Causes
      • Diagnosis
    • DTC C1078: Tire Turning Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1219: Steering Wheel Sensor System (Faulty Signal)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C121A: Steering Wheel Sensor System (Neutral Learning Abnormality)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C123C: G And Yaw Rate Sensor System (Lateral G And Yaw Rate Sensor Output Signal)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1242: G And Yaw Rate Sensor System (Abnormality Of Longitudinal G Sensor Output Signal)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1610: AWC Power Supply Electronic Relay Malfunction
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1613: Drive Mode Selector System (Stuck On)
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1614: Parking Brake Switch System (Stuck On)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1615: Brake Control Prohibited Request
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1616: Cranking Signal System (Stuck On)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1621: Electronic Control Coupling Solenoid Protection
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1623: Brake Control Abnormality
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1624: AWC-Ecu Internal Abnormality
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1626: Actuator Power Supply Voltage Malfunction
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1628: Abnormal Electronic Control Coupling Solenoid Current
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1629: ASC Can Data (Not Received)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1630: Steering Wheel Sensor Can Data (Not Received)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1631: ETACS Can Data (Not Received)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1632: Engine Can Data (Not Received)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1633: Transmission Can Data (Not Received)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C1707: Implausible Coding Data
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C2100: Battery Voltage Malfunction (Low Voltage)
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C2101: Battery Voltage Malfunction (High Voltage)
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC C2205: Steering Wheel Sensor System (Internal Error)
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0100: Engine Time-Out Error
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0101: Transmission Time-Out Error
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0121: ASC Time-Out Error
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0126: Steering Wheel Sensor Time-Out Error
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0141: ETACS Time-Out Error
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0401: Engine Data Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0428: Steering Wheel Sensor Data Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U0431: ETACS Data Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U1073: Bus-Off
      • Notes
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U1195: Coding Not Completed
      • Notes
      • Operation
      • <DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U119A: VIN Mismatch
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U1425: Transmission Data Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U1426: ASC Data Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U1427: Wheel Speed Sensor Data Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
    • DTC U1428: G And Yaw Rate Sensor Data Malfunction
      • Notes
      • Operation
      • DTC Set Conditions
      • Probable Causes
      • Diagnosis
  • Symptom Procedures
    • Inspection Procedure 1: Communication Between Scan Tool (M.U.T.-IIISE) And AWC-Ecu Cannot Be Established
      • Comments On Trouble Symptom
      • Probable Causes
      • Diagnosis
    • Inspection Procedure 2: Shifting The S-AWC Drive Mode-Selector Does Not Change The Mode
      • Comments On Trouble Symptom
      • Probable Causes
      • Diagnosis
    • Inspection Procedure 3: The Tight Corner Braking Phenomenon* Appears With The S-AWC Drive Mode-Selector In The Auto Position
      • Notes
      • Comments On Trouble Symptom
      • Probable Causes
      • Diagnosis
    • Inspection Procedure 4: AWD System Check Screen Is Displayed On The Center Of The Multi-Information Display And A "AWD" Symbol Flashes At The Left Top. But No Diagnostic Trouble Codes Are Set
      • Comments On Trouble Symptom
      • Probable Causes
      • Diagnosis
    • Inspection Procedure 5: Malfunction Of Power Supply Circuit System
      • Comments On Trouble Symptom
      • Probable Causes
      • Diagnosis
  • Special Function
  • Check At AWC-Ecu Terminal
• Special Tools
• On-Vehicle Service
  • Control System Component Part Configuration Diagram
• Essential Service
  • Transmission Fluid Check
  • Transmission Fluid Change
  • Flushing Coolers And Tubes <Vehicles With Air-Cooled Oil Cooler Assembly>
  • Oil Cooler Flow Check
  • Transmission Range Switch Continuity Check
  • Transmission Range Switch And Control Cable Adjustment
  • Transfer Oil Check <AWD>
  • Transfer Oil Change <AWD>
  • Electronic Control Coupling Operation Check <AWD>
• CVT Control Component Check
  • Transmission Range Switch Check
  • Solenoid Valve Check
  • Valve Body Harness Check
  • Transmission Fluid Temperature Sensor Check
  • Selector Lever Assembly Continuity Check
  • Accelerator Pedal Position Sensor (APS) Check
  • Stoplight Switch Check
  • Selector Lever Operation Check
  • Shift Lock Mechanism Check
    • System Check
  • Component Parts Check
    • Shift Lock Link
    • Shift Lock Solenoid
• Transaxle Control
  • Removal And Installation
    • Notes
    • Removal Service Point
      • <<A>> Selector Lever Knob Removal
  • Selector Lever Assembly Continuity Check
    • Switch Check
    • Key Lock Relay Check
      • <Vehicles Without Kos>
• Oil Seal
  • Removal And Installation
    • Notes
    • Removal Service Points
      • <<A>> Side Oil Seal (LH) Removal
      • <<B>> Side Oil Seal (RH) Removal
    • Installation Service Points
      • >>A<< Side Oil Seal (LH) Installation
      • >>B<< Side Oil Seal (RH) Installation
• Oil Filter
  • Removal And Installation
• Oil Pan And Valve Body Assembly
  • Removal And Installation
    • Notes
    • Removal Service Points
      • <<A>> Snap Ring Removal
      • <<B<< Valve Body Assembly Removal
    • Installation Service Points
      • >>A<< Lip Seal Installation
      • >>B<< Valve Body Assembly Installation
      • >>C<< Oil Strainer Installation
      • >>D<< Oil Pan Gasket Installation
      • >>E<< Oil Pan Installation
• Transmission Range Switch
  • Removal And Installation
• Sensors
  • Removal And Installation
• Transaxle Assembly
  • Removal And Installation
    • Notes
    • Removal Service Points
      • <<A>> CVT Assembly Connector Disconnection
      • <<B>> Transmission Control Cable Disconnection
      • <<C>> Torque Converter And Drive Plate Coupling Bolt Removal
      • <<D>> Engine Assembly Holding
      • <<E>> Transaxle Assembly Coupling Bolt And Transaxle Assembly Removal
    • Installation Service Points
      • >>A<< Transaxle Assembly Installation
      • >>B<< Transaxle Control Cable Installation
• Transfer Assembly
  • Removal And Installation
    • Notes
    • Removal Service Point
      • <<A>> Transfer Assembly Removal
• Transaxle Control Module (TCM)
  • Removal And Installation
• AWC-Ecu
  • Removal And Installation
• Transmission Fluid Cooler And Cooler Line
  • Removal And Installation
    • Notes
    • <Vehicles Without Air-Cooled Oil Cooler Assembly>
    • <Vehicles With Air-Cooled Oil Cooler Assembly>
  • Thermal Valve Check
• Paddle Shift Assembly
  • Removal And Installation
  • Paddle Shift Switch Check
• S-AWC Drive Mode-Selector
  • Removal And Installation
  • S-AWC Drive Mode-Selector Inspection
• Electronic Control Coupling
  • Removal And Installation
    • Notes
    • Installation Service Point
      • >>A<< Electronic Control Coupling Installation