LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2020 >> Outlander SP, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle On Vehicle Service (With Diagnostics) >> Automatic Transaxle Diagnosis <A/T> >> How To Initialize A/T Learned Value >> Initialization Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

  1. Move the selector lever to the P range and turn the ignition switch to the LOCK (OFF) position.

    Then, connect scan tool (M.U.T.-III) to the data link connector.

  2. Turn the ignition switch to the ON position, and then move the selector lever to the R range.
  3. Depress the accelerator pedal while depressing the brake pedal. (Engine is not running.) Using the scan tool (M.U.T.-III), execute the clear DTC function for the TCM (even if no codes are stored).
NOTE: Performing initialization of the learned value will also erase the DTC.
scientia non olet · About LEMON Manuals