DTC C2206: Re-execution of variant coding: Notes
CAUTION:
- If there is any problem in the CAN bus lines, an incorrect DTC may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
- Whenever ECU is replaced, ensure that the CAN bus lines are normal.
- When DTC C2206 is set in ASC-ECU, the DTC may also be set in ETACS-ECU. When the DTC is set in ETACS-ECU, carry out the diagnosis of the DTC for ETACS-ECU first.
- When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the G and yaw rate sensor and the steering wheel sensor (Refer to G AND YAW RATE SENSOR CALIBRATION and STEERING WHEEL SENSOR CALIBRATION ).