Cruise Control Systems
- General Description
- Special Tools
- Cruise Control System Diagnosis
- Introduction To Cruise Control System Diagnosis
- Diagnosis Troubleshooting Flow
- Diagnostic Function
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- Check Chart For Trouble Symptoms
- Symptom Procedures
- Inspection Procedure 1: When the Brake Pedal is Depressed, Cruise Control is not Cancelled
- Inspection Procedure 2: When the Clutch Pedal is Depressed, Cruise Control is not Cancelled
- Inspection Procedure 3: When the Selector Lever is Set to "N" Position, Cruise Control is not Cancelled
- Inspection Procedure 4: When the "CANCEL" Switch is Pressed, Cruise Control is not Cancelled
- Inspection Procedure 5: Cruise Control cannot be Set (No Response "SET-" Switch and "RES+" Switch is Pressed)
- Inspection Procedure 6: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed
- Inspection Procedure 7: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed
- Inspection Procedure 8: When the Cruise Control ON/OFF Switch is Turned ON, the Cruise Control Indicator Light does not Illuminate (However, the Cruise Control System is Normal) OPERATION
- Inspection Procedure 9: When the Cruise Control Switch is Operated, the System is not Turned ON
- Data List Reference Table
- Check At The Engine Control Module (ECM) Terminal
- On-Vehicle Service
- Cruise Control Switch