Data List Reference Table
CAUTION:
- Road test always needs two people: one driver and one observer.
- When shifting the selector lever to "D" position the brakes should be applied so that the vehicle does not move forward.
NOTE:
When checking the data list, select "MFI/GDI/DIESEL" on the scan tool (M.U.T.-III) system select screen since the cruise control system is controlled by the ECM.
| ITEM NUMBER | SCAN TOOL (M.U.T.-III) DISPLAY [CHECK ITEM] | CHECK CONDITION | NORMAL CONDITION | |
|---|---|---|---|---|
| 4 | Vehicle speed [Vehicle speed signal] | Road test the vehicle. | The speedometer and scan tool (M.U.T.-III) display the same value. | |
| 57 | Cancel code [Cancel code] | Ignition switch: "ON" position | The cancel code, which set when the cruise control system was cancelled at the last time, is set again. | |
| 74 | Brake light switch [Stoplight switch (for stoplight circuit)] | Ignition switch: "ON" position | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | |||
| 75 | Cancel switch [Cruise control switch ("CANCEL" switch)] | Ignition switch: "ON" position | "CANCEL" switch: Pressed | ON |
| "CANCEL" switch: Released | OFF | |||
| 78 | Clutch pedal position switch [Clutch interlock switch (for cruise control system)] <M/T> | Ignition switch: "ON" position | Clutch pedal: Depressed | ON |
| Clutch pedal: Released | OFF | |||
| 81 | Cruise control [Cruise control operation] | Cruise control: active | ON | |
| Cruise control: Inactive | OFF | |||
| 86 | Main switch [Cruise control switch (Cruise control ON/OFF switch)] | Ignition switch: "ON" position | Cruise control ON/OFF switch: Pressed | ON |
| Cruise control ON/OFF switch: Released | OFF | |||
| 88 | Neutral switch (A/Cruise) [Transmission range switch] <CVT> | Ignition switch: "ON" position | Selector lever: "N" or "P" range | ON |
| Selector lever: Other than "N" or "P" range | OFF | |||
| 89 | Normally closed brake switch [Brake switch (for cruise control circuit)] | Ignition switch: "ON" position | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | |||
| 91 | Resume switch [Cruise control switch ("RES+" switch)] | Ignition switch: "ON" position | "RES+" switch: Pressed | ON |
| "RES+" switch: Released | OFF | |||
| 92 | Set switch [Cruise control switch ("SET-" switch)] | Ignition switch: "ON" position | "SET-" switch: Pressed | ON |
| "SET-" switch: Released | OFF | |||