Check at REMCU connector terminal
| Terminal No. | Terminal code | Check item | Checking requirements | Normal condition |
|---|---|---|---|---|
| 4 | GND | ECU power supply ground | Always | 1 V or less |
| 5 | CAEH | CAN communication | - | - |
| 6 | CAEL | CAN communication | - | - |
| 12 | RSDN | REMCU shut-down signal | The power supply mode of the electric motor switch: ON | 1 V or less |
| 13 | IGCT | ECU control power supply voltage | The power supply mode of the electric motor switch: ON | Battery voltage |
| The power supply mode of the electric motor switch: OFF | 1 V or less |