How To Read Data List
Required Special Tools:
- MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
- MB992745: V.C.I.-Lite main harness A
- MB992747: V.C.I.-Lite USB cable short
- MB992748: V.C.I.-Lite USB cable long
- MB991958: Scan Tool (M.U.T.-III Sub Assembly)
- MB991824: Vehicles Communication Interface (V.C.I.)
- MB991827: M.U.T.-III USB Cable
- MB991910: M.U.T.-III Main Harness A (Vehicles with CAN communication system)
- Connect the scan tool (M.U.T.-IIISE) to the data link connector.
- Turn on the power supply mode of the electric motor switch.
- Select "STV."
- Select "F-MCU" <FEMCU> or "GCU" <Generator control unit> or "R-MCU" <REMCU>.
- Select "Data List."
- Select an appropriate item and select the "OK" button.