»A« Spider Assembly/Inboard Joint Case Installation
CAUTION:
Special grease is used for the joint. Do not mix the new and previous types of grease or different types of grease.
Fill the inboard joint case with the specified grease, insert the driveshaft, and then fill the specified grease again.
Specified grease: Repair kit grease
Application amount: 75 ± 10 g (2.6 ± 0.3 ounces)
NOTE:
When using the repair kit grease, fill the half of the grease into the joint and the other half into the boot as a guide-line, and consume the grease completely.