Detailed Flow

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

INTERVIEW FOR MALFUNCTION
It is important to clarify the customer's concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.

NOTE: The customers are not professionals. Never assume that "maybe the customer means..." or "maybe the customer mentioned this symptom".

>>

GO TO 2.
SELF-DIAGNOSIS WITH M.U.T-III SE
M.U.T.-III SE
1. Perform "Read All DTCs" mode.
2. Check if the DTC is detected in the "Self Diagnostic Result" of the following:
  - " ACC/ADAS 2"
  - "LASER/RADAR"
  - "LANE CAMERA"
  - "Side radar (Rear left)"
  - "Side radar (Rear right)"
Is any DTC detected??

YES >>

GO TO 5.

NO >>

GO TO 3.
ACTION TEST
1. Perform the system action test to check the operation status of the following:
  - LDW: Refer to Work Procedure INSPECTION PROCEDURE .
  - LDP: Refer to Work Procedure INSPECTION PROCEDURE .
  - BSW: Refer to WORK PROCEDURE .
  - Active Blind Spot Assist [ABSA]: Refer to WORK PROCEDURE .
  - TSR: Refer to WORK PROCEDURE .
  - RCTA: Refer to WORK PROCEDURE .
  - DAA: Refer to WORK PROCEDURE .
2. Check if any other malfunctions occur.
>>

GO TO 4.
SYMPTOM DIAGNOSIS
Perform the applicable diagnosis according to the diagnosis chart by symptom. Refer to SYMPTOM TABLE .

>>

GO TO 6.
TROUBLE DIAGNOSIS BY DTC
M.U.T.-III SE
1. Check the DTC in the "Self Diagnostic Result".
2. Perform trouble diagnosis for the following detected DTC:
  - "ACC/ADAS 2": Refer to DTC INDEX .
  - "LASER/RADAR": Refer to DTC INDEX .
  - "LANE CAMERA": Refer to DTC INDEX .
  - "Side radar (Rear left)": Refer to DTC INDEX .
  - "Side radar (Rear right)": Refer to DTC INDEX .
NOTE: If Network-DTC is detected, first diagnose the CAN communication system.

>>

GO TO 6.
MALFUNCTIONING PART REPAIR
Repair or replace the identified malfunctioning parts.

>>

GO TO 7.
REPAIR CHECK (SELF-DIAGNOSIS WITH M.U.T.-III SE)
1. Erase "Self Diagnostic Result".
2. Perform "Read All DTCs" mode after repairing or replacing the specific items.
3. Check if any DTC is detected in self-diagnosis results of the following:
  - "ACC/ADAS 2"
  - "LASER/RADAR"
  - "LANE CAMERA"
  - "Side radar (Rear left)"
  - "Side radar (Rear right)"
Is any DTC detected?

YES >>

GO TO 5.

NO >>

GO TO 8.
REPAIR CHECK (ACTION TEST)
Perform the following system action test. Check that the malfunction symptom is solved or no other symptoms occur.
- LDW: Refer to Work Procedure INSPECTION PROCEDURE .
- LDP: Refer to Work Procedure INSPECTION PROCEDURE .
- BSW: Refer to WORK PROCEDURE .
- Active Blind Spot Assist [ABSA]: Refer to WORK PROCEDURE .
- TSR: Refer to WORK PROCEDURE .
- RCTA: Refer to WORK PROCEDURE .
- DAA: Refer to WORK PROCEDURE .
Is there a malfunction symptom?

YES >>

GO TO 4.

NO >>

Inspection End.