Component Function Check
WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
With M.U.T.-III SE
- Ignition switch ON.
- Select "HANDS FREE MODULE" using M.U.T.-III SE.
- Select "Push SW" in "Data List" mode.
- Check the push-button ignition switch signal under the following conditions.
Monitor item Condition Status Push SW Push-button ignition switch is pressed On Push-button ignition switch is not pressed Off
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Refer to DIAGNOSIS PROCEDURE .