Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

The knurled surface of rib should be upward when installing the control cable to the control device assembly. And insert the control cable securely.
After installation is completed, adjust and check CVT position. Refer to "ADJUSTMENT OF CVT POSITION " and "CHECKING OF CVT POSITION ".

Fig 1: Identifying Control Cable And Control Device Assembly

Courtesy of NISSAN MOTOR CO., U.S.A.