LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2009 >> Versa Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Shift Control System >> Control Device Disassembly and Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Device Disassembly and Assembly: Disassembly

NOTE: Refer to "CONTROL DEVICE COMPONENTS " to disassemble.
  1. Remove selector lever knob from control device assembly. Refer to "SELECTOR LEVER KNOB REMOVAL AND INSTALLATION ".
  2. Remove position lamp from position indicator plate (1).
  3. Insert a flat-bladed screwdriver to (A) (at 4 locations) as shown, and bend each hook slightly to raise position indicator plate (1) and remove from control device assembly (2).
  4. Remove bracket from control device assembly (2).
  5. Remove A/T device harness connector from control device assembly (2).
    Fig 1: Identifying Indicator Plate And Control Device Assembly
    G04813176Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Release tabs (A) on shift lock solenoid and park position switch assembly from hooks (B) on control device assembly to shift lock solenoid and park position switch assembly.
    Fig 2: Identifying Tabs And Hooks
    G04813177Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals