LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2010 >> 370Z Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1089 Through P2A03 >> DTC P1572: ASCD Brake Switch >> Component Inspection (ASCD Brake Switch)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection (ASCD Brake Switch)

  1. CHECK ASCD BRAKE SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect ASCD brake switch harness connector.
    3. Check the continuity between ASCD brake switch terminals under the following conditions.
    CONTINUITY CHART

    Terminals Condition Continuity
    1 and 2 Brake pedal Fully released Existed
    Slightly depressed Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. CHECK ASCD BRAKE SWITCH-II
    1. Adjust ASCD brake switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check the continuity between ASCD brake switch terminals under the following conditions.
    CONTINUITY CHART

    Terminals Condition Continuity
    1 and 2 Brake pedal Fully released Existed
    Slightly depressed Not existed

    Is the inspection result normal?

    YES: INSPECTION END

    NO: Replace ASCD brake switch.

scientia non olet · About LEMON Manuals