LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2010 >> Cube Base >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater & Air Conditioning Control System >> Automatic Air Conditioner >> Diagnosis System (BCM) (Without Intelligent Key System) >> Common Item >> COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) >> Application Item
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Application Item

CONSULT-III can display each diagnostic item using the diagnostic test modes shown in the following chart.

DIAGNOSIS MODE FUNCTION DESCRIPTION CHART

Diagnosis mode Function description
ECU Identification BCM part number is displayed.
Self-Diagnostic Result Displays the diagnosis results judged by BCM. Refer to "DTC INDEX ".
Data Monitor BCM input/output signals are displayed.
Active Test The signals used to activate each device are forcibly supplied from BCM.
Work Support Changes the setting for each system function.
Configuration
  • Read and save the vehicle specification.
  • Write the vehicle specification when replacing BCM.
CAN Diag Support Monitor Monitors the reception status of CAN communication viewed from BCM.
scientia non olet · About LEMON Manuals