LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2010 >> Cube Base >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System (With Intelligent Key System) >> DTC/Circuit Diagnosis >> DTC B2601: Shift Position >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)
    1. Turn ignition switch OFF.
    2. Disconnect CVT shift selector connector.
    3. Check continuity between CVT shift selector (detention switch) terminals.
    CONTINUITY SPECIFICATION

    CVT shift selector (detention switch) Condition Continuity
    Terminal
    7 8 Selector lever P position Not existed
    Other than above Existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace CVT shift selector. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals