Component Inspection [CVT Shift Selector (Detention Switch)]
- CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)
- Turn ignition switch OFF.
- Disconnect CVT shift selector connector.
- Check continuity between CVT shift selector (detention switch) terminals.
CONTINUITY SPECIFICATION
| CVT shift selector (detention switch) | Condition | Continuity | ||
|---|---|---|---|---|
| Terminal | ||||
| 7 | 8 | Selector lever | P position | Not existed |
| Other than above | Existed | |||
Is the inspection result normal?
YES: INSPECTION END
NO: Replace CVT shift selector. Refer to "REMOVAL AND INSTALLATION ".