DTC Confirmation Procedure
- PERFORM DTC CONFIRMATION PROCEDURE-1
- Press the push-button ignition switch and wait 1 second or more under the following conditions.
- Selector lever is in the P or N position
- Do not depress brake pedal
- Check "Self-diagnosis result" using CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: GO TO 2.
- Press the push-button ignition switch and wait 1 second or more under the following conditions.
- PERFORM DTC CONFIRMATION PROCEDURE-2
- Turn ignition switch ON.
- Turn ignition switch OFF.
- Press driver side door switch and wait 1 second or more.
- Check "Self-diagnosis result" using CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END