Component Inspection

CHECK THROTTLE CONTROL MOTOR

Check resistance between electric throttle control actuator terminals as per the following.

TERMINAL RESISTANCE CHART

Terminals	Resistance
5 and 6	Approx. 1 - 15 Ω [at 25°C (77°F)]

Is the inspection result normal?

YES: INSPECTION END

NO: GO TO 2.

Fig 1: Checking Resistance Between Electric Throttle Control Actuator Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
1. Replace electric throttle control actuator.
2. Go to "SPECIAL REPAIR REQUIREMENT ".
  INSPECTION END