LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2015 >> Leaf SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Security Control System (With Intelligent Key System)) >> With Intelligent Key System >> Symptom Diagnosis >> Intelligent Key System/Engine Start Function Symptoms >> Symptom Table >> Conditions Of Vehicle (Operating Conditions)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Conditions Of Vehicle (Operating Conditions)

WARNING: This page is about a different car, the 2015 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
Symptom Diagnosis/Service Procedure Reference
Ignition switch does not turn on with Intelligent Key.
[LCD displays "KEY DETECTED"]
1. Check steering lock solenoid. DTC LOGIC 
2. Replace Intelligent Key unit. REMOVAL AND INSTALLATION 
Ignition switch does not turn on with Intelligent Key.
[LCD does not display "KEY DETECTED"]
1. Check Intelligent Key unit power supply and ground circuit. INTELLIGENT KEY UNIT DIAGNOSIS PROCEDURE
2. Check ignition knob switch. DIAGNOSIS PROCEDURE
3. Check key switch (BCM input). DIAGNOSIS PROCEDURE
4. Check key switch (Intelligent Key unit input). DIAGNOSIS PROCEDURE
5. Replace Intelligent Key unit. REMOVAL AND INSTALLATION 
Ignition switch does not turn on with Intelligent Key.
[LCD displays " NO KEY DETECTED"]
1a. Check center console area antenna (rear). COMPONENTFUNCTIONCHECK
1b. Check luggage area antenna. DIAGNOSIS PROCEDURE
1c. Check center console area antenna (front). COMPONENTFUNCTIONCHECK
1d. Check overhead console area antenna. COMPONENTFUNCTIONCHECK
2. Replace Intelligent Key unit. REMOVAL AND INSTALLATION 
Ignition switch does not turn on with mechanical key 1. Check key switch (BCM input). DIAGNOSIS PROCEDURE
2. Check key switch (Intelligent Key unit input). DIAGNOSIS PROCEDURE
Engine cannot be cranked with transmission in "Park" or in "Neutral" position with brake pedal depressed 1. Check transmission signal. DESCRIPTION
2. Check stop lamp switch. WIRING DIAGRAM