Diagnostic Test
WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE:If "READ CONFIGURATION" can not be used, use "MANUAL CONFIGURATION" after replacing around view monitor control unit.
GO TO STEP 2 .
- REPLACE AROUND VIEW MONITOR CONTROL UNIT
Replace around view monitor control unit. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file" or "MANUAL CONFIGURATION" to write vehicle specification. Refer to WORK PROCEDURE .
GO TO STEP 4 .
- CALIBRATE CAMERA IMAGE
Perform calibration of camera image. Refer to DESCRIPTION .
Work End.