Outline Of ICC Sensor Alignment Procedure
- A 4-wheel vehicle alignment must be performed before proceeding with ICC sensor alignment procedure.
- Always perform the ICC sensor alignment after removing and installing or replacing the ICC sensor.
- If the ICC sensor was removed and installed or replaced, first perform ICC Sensor Initial Vertical Alignment, refer to DESCRIPTION .
CAUTION:
The system does not operate normally unless the ICC sensor is aligned properly.
- For required tools, refer to REQUIRED TOOLS .
- For preparation, refer to PREPARATION .
- For vehicle set up, refer to VEHICLE SET UP .
- For setting the ICC target board, refer to SETTING THE ICC TARGET BOARD .
- For ICC sensor adjustment, refer to ICC SENSOR ADJUSTMENT .