Around View Monitor System
WARNING: This page is about a different car, the 2017 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
| Symptom | Check items | Probable malfunction location | |
|---|---|---|---|
| Screen is not switched to camera image when CAMERA button is pressed or when shift position is shifted to "R". | "AVM" is not displayed on the system selection screen of CONSULT. | Around view monitor control unit power supply or ground circuit. Refer to DIAGNOSIS PROCEDURE . | |
Check that Data Monitor item values are normal using CONSULT:
|
CAMERA SWITCH SIGNAL and REVERSE SIGNAL are normal. | Around view monitor control unit. Refer to REMOVAL AND INSTALLATION . | |
| CAMERA SWITCH SIGNAL is not normal. | CAN communication circuit. Refer to TROUBLE DIAGNOSIS FLOW CHART . | ||
| REVERSE SIGNAL is not normal. | Reverse signal circuit. Refer to DIAGNOSIS PROCEDURE . | ||
|
Check the following Data Monitor item using CONSULT:
|
F-CAMERA IMAGE SIGNAL: NG | Front camera power supply circuit and image signal circuit. Refer to DIAGNOSIS PROCEDURE . |
|
Check the following Data Monitor item using CONSULT:
|
REAR CAMERA IMAGE SIGNAL: NG | Rear camera power supply circuit and image signal circuit. Refer to DIAGNOSIS PROCEDURE . |
| LH side of around view screen is not displayed. | Check the following Data Monitor item using CONSULT:
|
DR-SIDE CAMERA IMAGE SIGNAL: NG | Side camera LH power supply circuit and image signal circuit. Refer to DIAGNOSIS PROCEDURE . |
|
Check the following Data Monitor item using CONSULT:
|
PA-SIDE CAMERA IMAGE SIGNAL: NG | Side camera RH power supply circuit and image signal circuit. Refer to DIAGNOSIS PROCEDURE . |