Component Function Check

ASCD indicator lamp illuminates to indicate ASCD operation status. Lamp has two indicators, CRUISE and SET, and is integrated in combination meter.

CRUISE lamp illuminates when MAIN switch on ASCD steering switch is turned ON to indicated that ASCD system is ready for operation.

SET lamp illuminates when the following conditions are met.

• CRUISE lamp is illuminated.
• SET/COAST switch on ASCD steering switch is turned ON while vehicle speed is within the range of the ASCD setting.

SET lamp remains lit during ASCD control. Refer to System Description .

1. CHECK ASCD INDICATOR FUNCTION 

   Check ASCD indicator under the following conditions.

   ASCD INDICATOR	CONDITION		SPECIFICATION
   CRUISE LAMP	Ignition switch: ON	MAIN switch: Pressed at the 1st time -> at the 2nd time	ON -> OFF
   SET LAMP	MAIN switch: ON When vehicle speed is between 40 km/h (25 MPH) and 144 km/h (89 MPH)	ASCD: Operating	ON
   		ASCD: Not operating	OFF

   Is the inspection result normal?

   YES

   INSPECTION END

   NO

   Refer to Diagnosis Procedure .