Remote Engine Start Function (For VR30DDTT Engine Models)

Remote engine start function enables engine to be started from vehicle outside by operating REMOTE ENGINE START button of Intelligent Key or mobile phone.

In the same way as the Intelligent Key, the engine can be started by operating a cellular phone using the Telematics system function. For details, refer to System Description .

Engine Start Procedures 

The following operation enables the engine to be started.

• Press LOCK button of Intelligent Key, and then within 5 seconds, press and hold REMOTE ENGINE START button of Intelligent Key for 2 seconds or more.
• Perform engine start operation using a cellular phone.

Engine does not start while the vehicle is in the following status.

• All doors are UNLOCK or any door is open.
• Hood is open.
• A registered Intelligent Key is in passenger room.
• Shift position is other than P.
• Vehicle security alarm is in operation
• Hazard lamp is in operation.

Engine Stop Procedures 

The following operation enables the engine to be stopped.

• Press REMOTE ENGINE START button of Intelligent Key.
• Perform engine stop operation using a cellular phone.
• Push-button ignition switch is operated.

Engine stops when the vehicle status changes to the following status

• 10 minutes are passed since engine start.
• Hood is open.
• Shift position is shifted to a position other than P.
• Vehicle security alarm starts to operate.

Operation Area 

The engine can be started when the vehicle is under the following conditions.

• The remote engine start operating range is approximately 60 m (197 ft.) from the vehicle.
• The vehicle is within the communication range of the Infiniti Connection? data center.