LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2020 >> Kicks S >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Brake Control System >> System Description >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> CONSULT Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

x: Applicable

Item (Unit)

Monitor item selection

Note

INPUT SIGNALS

MAIN SIGNALS

FR LH SENSOR

[km/h (MPH)]

x

x

Wheel speed calculated by front LH wheel sensor is displayed.

FR RH SENSOR

[km/h (MPH)]

x

x

Wheel speed calculated by front RH wheel sensor is displayed.

RR LH SENSOR

[km/h (MPH)]

x

x

Wheel speed calculated by rear LH wheel sensor is displayed.

RR RH SENSOR

[km/h (MPH)]

x

x

Wheel speed calculated by rear RH wheel sensor is displayed.

ACCEL POS SIG

(%)

x

Displays the Accelerator pedal position

SIDE G-SENSOR

(m/s2 )

x

Side G detected by yaw rate/side/decel G sensor is displayed.

BATTERY VOLT

(V)

x

x

Voltage supplied to ABS actuator and electric unit (control unit) is displayed.

DECEL G-SEN

(m/s2 )

x

x

Decel G detected by decel G sensor is displayed.

ENGINE SPEED

(tr/min)

x

x

Engine speed status is displayed.

STR ANGLE SIG

x

Steering angle detected by steering angle sensor is displayed.

PRESS SENSOR

(bar)

x

Brake fluid pressure detected by pressure sensor is displayed.

FL WHEEL SPD

Displays the rotational speed of front LH tire.

FR WHEEL SPD

Displays the rotational speed of front RH tire.

RR WHEEL SPD

Displays the rotational speed of rear RH tire.

RL WHEEL SPD

Displays the rotational speed of rear LH tire.

YAW RATE SEN

x

x

Yaw rate detected by yaw rate/side/decel G sensor is displayed.

FR LH IN SOL

(On/Off)

x

Operation status of front RH wheel ABS IN valve is displayed.

FR RH OUT SOL

(On/Off)

x

Operation status of front RH wheel ABS OUT valve is displayed.

FR RH IN SOL

(On/Off)

x

Operation status of front LH wheel ABS IN valve is displayed.

FR LH OUT SOL

(On/Off)

x

Operation status of front LH wheel ABS OUT valve is displayed.

RR RH IN SOL

(On/Off)

x

Operation status of rear RH wheel ABS IN valve is displayed.

RR RH OUT SOL

(On/Off)

x

Operation status of rear RH wheel ABS OUT valve is displayed.

RR LH IN SOL

(On/Off)

x

Operation status of rear LH wheel ABS IN valve is displayed.

RR LH OUT SOL

(On/Off)

x

Operation status of rear LH wheel ABS OUT valve is displayed.

EBD WARN LAMP

(On/Off)

Brake warning lamp ON/OFF status is displayed.(Note 1)

STOP LAMP SW

(On/Off)

Stop lamp switch signal input status is displayed.

ABS WARN LAMP

(On/Off)

ABS warning lamp ON/OFF status is displayed.(Note 1)

MOTOR RELAY

(On/Off)

ABS motor and motor relay status is displayed.

ACTUATOR RLY

(On/Off)

ABS actuator relay status is displayed.

OFF LAMP

(On/Off)

VDC OFF indicator lamp ON/OFF status is displayed.(Note 1)

OFF SW

(On/Off)

x

VDC OFF switch status is displayed.

SLIP/VDC LAMP

(On/Off)

VDC warning lamp ON/OFF status is displayed.(Note 1)

TRQ DOWN SIG

(On/Off)

Operation of engine torque down signal is displayed.

EBD SIGNAL

(On/Off)

EBD operation status is displayed.

ABS SIGNAL

(On/Off)

ABS operation status is displayed.

TCS SIGNAL

(On/Off)

TCS operation status is displayed.

VDC SIGNAL

(On/Off)

VDC operation status is displayed.

EBD FAIL SIG

(On/Off)

EBD fail-safe signal status is displayed.

ABS FAIL SIG

(On/Off)

ABS fail-safe signal status is displayed.

TCS FAIL SIG

(On/Off)

TCS fail-safe signal status is displayed.

VDC FAIL SIG

(On/Off)

VDC fail-safe signal status is displayed.

GEAR

x

x

Current gear position judged from current gear position signal is displayed.

N POSI SIG

(On/Off)

N range signal input status judged from N range signal is displayed.

P POSI SIG

(On/Off)

P range signal input status judged from P range signal is displayed.

R POSI SIG

(On/Off)

R range signal input status judged from R range signal is displayed.

CRANKING SIG

(On/Off)

Cranking status is displayed.

1st GEAR SIG

(On/Off)

1st range status is displayed.

FLUID LEV SW

(On/Off)

x

Brake fluid level signal input status is displayed.

CV1

(On/Off)

Operation status of cut valve 1 is displayed.

CV2

(On/Off)

Operation status of cut valve 2 is displayed.

SV1

(On/Off)

Operation status of suction valve 1 is displayed.

SV2

(On/Off)

Operation status of suction valve 2 is displayed.

Wheel speed repro impossible

(On/Off)

Wheel speed precondition for reprogramming not met.

Low voltage repro impossible

(On/Off)

Voltage level precondition for reprogramming not met.

Note 1. Refer to System Description  for ON/OFF conditions of each warning lamp and indicator lamp.