Self Diagnostic Result Mode
Self Diagnostic Item
Regarding items of DTC and 1st trip DTC. Refer to DTC Index .
How to Read DTC and 1st Trip DTC
DTCs and 1st trip DTCs related to the malfunction are displayed in "self-diag results".
- When ECM detects a 1st trip DTC, "1t" is displayed for "TIME".
- When ECM has detected a current DTC, "0" is displayed for "TIME".
- If "TIME" is neither "0" nor "1t", the DTC occurred in the past and ECM shows the number of times the vehicle has been driven since the last detection of the DTC.
How to Erase DTC and 1st Trip DTC
NOTE:
If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
- Select "ENGINE" with CONSULT.
- Select "SELF-DIAG RESULTS".
- Touch "ERASE". (DTC in ECM will be erased.)
Freeze Frame Data and 1st Trip Freeze Frame Data
|
Freeze frame data item* |
Description |
|
ODO/TRIP METER [km] |
|
|
Warm up cycle counter |
. |
|
FUEL SYS - B1 |
|
|
FUEL SYS - B2 |
|
|
CAL/LD VALUE |
|
|
COOLANT TEMP |
|
|
L - FUEL TRM - B1 |
|
|
L - FUEL TRM- B2 |
|
|
S - FUEL TRM - B1 |
|
|
S - FUEL TRM - B2 |
|
|
ENGINE SPEED [rpm] |
|
|
VEHICL SPEED |
|
|
INT MANI PRES [kPa] |
|
|
ABSOL TH - P/S |
|
|
INT/A TEMP SE |
|
|
COMBUST CONDITION |
|
|
B/FUEL SCHDL [msec] |
|
*: The items are the same as those of 1st trip freeze frame data.