Check Anti-Pinch Function: Description

If any of the following operations are performed, the initialization is necessary for normal operation of

anti-pinch function.

• Disconnection and connection of 12V battery cable from negative terminal.
• When main power window and door lock/unlock switch is replaced.
• Electric power supply to main power window and door lock/unlock switch or power window motor LH is

  interrupted by blown fuse or disconnection and connection of the negative terminal of 12V battery, etc.

• Disconnection and connection of main power window and door lock/unlock switch harness connector.
• Removal of front power window motor LH from regulator assembly.
• Operation of regulator assembly as an independent unit.
• Removal and installation of glass.
• Removal and installation of door glass run.