Detailed Flow
- COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis worksheet.
GO TO 2.
- PERFORM THE SELF-DIAGNOSIS
Check the DTC display with the "Self Diagnostic Result". Refer to CONSULT Function .
Is there any DTC displayed?
YES
Record or print DTC and freeze frame data (FFD). GO TO 3.
NO
GO TO 4.
- PERFORM THE SYSTEM DIAGNOSIS
Perform the diagnosis applicable to the displayed DTC. Refer to DTC Index .
GO TO 6.
- CHECK THE WARNING LAMP FOR ILLUMINATION
Check that the warning lamp illuminate.
Is ON/OFF timing normal?
YES
GO TO 5.
NO
GO TO 2.
- PERFORM THE DIAGNOSIS BY SYMPTOM
Perform the diagnosis applicable to the symptom.
GO TO 6.
- REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
GO TO 7.
- FINAL CHECK
Perform the "Self Diagnostic Result" again, and check that the malfunction is repaired completely. After checking, erase the "Self Diagnostic Result". Refer to CONSULT Function .
Is no other DTC present and the repair completed?
YES
Inspection End.
NO
GO TO 3.