DTC Confirmation Procedure
- CHECK SELF-DIAG RESULT
CONSULT
- Ignition switch ON.
- Select "Self Diagnostic Result" mode of "AIR BAG".
Is the DTC detected?
YES
Refer to DTC Diagnosis Procedure .
YES
GO TO 2.
NO
Inspection End.
- ERASE SELF-DIAG RESULT
Erase the DTC.
Can the DTC be erased?
YES
Inspection End.
NO
Refer to DTC Diagnosis Procedure .
- CHECK SELF-DIAG RESULT
CONSULT
- Turn ignition switch ON.
- Check the air bag warning lamp status. Refer to On Board Diagnosis Function .
NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.Is the DTC detected?
YES
Refer to DTC Diagnosis Procedure .
NO
Inspection End.