Application Items

CONSULT performs the following functions via CAN communication using ADAS control unit 2.

Diagnosis mode	CGW Status			Description
Diagnosis mode	Restricted Mode	Diag Test Mode	Open Mode	Description
Self Diagnostic Result	Display	Display	Display	Displays malfunctioning system memorized in ADAS control unit 2
CGW Information	Display	Display	Display	Display the current CGW mode Enables CGW to switch mode
Data Monitor	Display	Display	Display	Displays real-time input/output data of ADAS control unit 2
Active Test	Non-display	Display	Display	Enables an operational check of a load by transmitting a driving signal from the ADAS control unit 2 to the load
Work Support	Non-display	Non-display	Display	It can monitor the adjustment direction indication in order to perform the radar alignment operation smoothly
ECU Identification	Display	Display	Display	Displays ADAS control unit 2 part number
Configuration	Display	Display	Display	The vehicle specification that is written in ADAS control unit 2 can be displayed or stored The vehicle specification can be written when ADAS control unit 2 is replaced
Network-DTC	Display	Display	Display	Display network DTC which ADAS control unit 2 memorizes when performing "Diagnosis (All System)".
CAN Diag Support Monitor	Display	Display	Display	The results of transmit/receive diagnosis of CAN communication can be read