Input Signal And Output Signal

Major signal transmission between each unit via communication lines is shown in the following table below.

Component parts	Signal description
ECM	Mainly transmits the following signals to chassis control module (with built in steering angle sensor) via CAN communication. Accelerator pedal position signal
ABS actuator and electric unit (control unit)	Mainly transmits the following signals to chassis control module (with built in steering angle sensor) via CAN communication. ABS operation signal Brake fluid pressure signal Decel G sensor signal Front LH wheel speed signal Front RH wheel speed signal Rear LH wheel speed signal Rear RH wheel speed signal TCS operation signal VDC accept permission signal VDC operation signal Vehicle speed signal Mainly receives the following signals from chassis control module (with built in steering angle sensor) via CAN communication. Active ride control signal
Combination meter	Mainly receives the following signals from chassis control module (with built in steering angle sensor) via CAN communication. Meter display signal