Fail Safe List
x: Applicable --: Not applicable
|
DTC No. |
Detected items |
Vehicle behavior |
|||||||
|
Pattern |
Others |
||||||||
|
A |
B |
C |
D |
E |
F |
||||
|
P0010 |
Electric intake valve timing control module |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
x |
x |
x |
-- |
||||
|
P0011 P0012 P052A P052B |
Intake valve timing control |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
NOTE:
When VTC mechanism sticks, camshaft position does not change from position of stuck angle.
|
|
|
P0016 |
-- |
-- |
-- |
-- |
-- |
-- |
|||
|
P0014 P0015 P0017 |
Exhaust valve timing control |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0078 |
Exhaust valve timing control solenoid valve |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0101 P0102 P0103 |
Mass air flow sensor |
x |
x |
x |
x |
x |
x |
-- |
|
|
P0107 P0108 |
Barometric pressure sensor (built-into ECM) |
x |
x |
x |
-- |
-- |
-- |
-- |
|
|
P0117 P0118 |
Engine coolant temperature sensor |
-- |
-- |
-- |
x |
x |
-- |
-- |
|
|
P0122 P0123 P0222 P0223 P2135 |
Throttle position sensor |
-- |
-- |
x |
-- |
-- |
-- |
The ECM controls the electric throttle control actuator in regulating the throttle opening in order for the idle position to be within +10 degrees. The ECM regulates the opening speed of the throttle valve to be slower than the normal condition. So, the acceleration will be poor. |
|
|
P0171 P0172 |
Fuel injection system function |
x |
-- |
-- |
x |
x |
-- |
-- |
|
|
P0196 P0197 P0198 |
Engine oil temperature sensor |
-- |
-- |
-- |
-- |
-- |
-- |
Exhaust valve timing control does not function. |
|
|
P0300 P0301 P0302 P0303 P0304 |
Misfire |
x |
-- |
-- |
x |
x |
-- |
-- |
|
|
P0335 |
Crankshaft position sensor |
-- |
-- |
x |
x |
x |
-- |
-- |
|
|
P0340 |
Intake camshaft position sensor |
-- |
-- |
x |
x |
-- |
-- |
-- |
|
|
-- |
-- |
x |
x |
x |
-- |
||||
|
P0365 |
Exhaust camshaft position sensor |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P0500 |
Vehicle speed sensor |
x |
-- |
-- |
x |
x |
-- |
-- |
|
|
P0524 |
Engine oil pressure |
-- |
-- |
-- |
-- |
-- |
-- |
|
|
|
P0603 P0607 |
ECM |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
ASCD operation may be deactivated. |
|||||||||
|
P0604 |
ECM |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P0605 P0606 |
ECM |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|||
|
P060A |
ECM |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
x |
x |
x |
-- |
-- |
-- |
|
|||
|
P060B |
ECM |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P0641 |
Sensor power supply |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
x |
x |
x |
-- |
||||
|
P0643 |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
||
|
P1805 |
Brake switch |
-- |
-- |
-- |
-- |
-- |
-- |
ECM controls the electric throttle control actuator by regulating the throttle opening to a small range. Therefore, acceleration will be poor. |
|
|
Vehicle condition |
Driving condition |
||||||||
|
When engine is idling |
Normal |
||||||||
|
When accelerating |
Poor acceleration |
||||||||
|
P2004 |
Intake manifold runner control valve |
x |
x |
x |
x |
-- |
-- |
-- |
|
|
P2008 |
x |
x |
x |
x |
x |
x |
|||
|
P2014 P2015 P2016 P2017 P2018 |
-- |
-- |
x |
-- |
-- |
-- |
|||
|
P2100 P2103 |
Throttle control motor relay |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P2101 |
Electric throttle control |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P2118 |
Throttle control motor |
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|
|
P2119 |
Electric throttle control actuator |
x |
x |
-- |
-- |
-- |
-- |
-- |
|
|
-- |
-- |
x |
-- |
-- |
-- |
ECM stops the electric throttle control actuator control, throttle valve is maintained at a fixed opening (approx. 5 degrees) by the return spring. |
|||
|
P2122 P2123 P2127 P2128 P2138 |
Accelerator pedal position sensor |
-- |
-- |
x |
-- |
-- |
-- |
-- |
|
|
P2614 P2615 |
Intake camshaft position sensor (electric intake valve timing control signal) |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
x |
x |
x |
-- |
||||
|
P2616 |
-- |
-- |
x |
x |
-- |
-- |
|||
|
P2617 P2618 |
Crankshaft position sensor (electric intake valve timing control signal) |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
P2619 |
-- |
-- |
x |
x |
x |
-- |
|||
|
P25DF P34A4 P34A5 P34A6 P34A7 P34AC P34AD |
Electric intake valve timing control actuator |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.)
NOTE:
Normal bank transitions intermediate F/S valve timing.
|
|
|
P34C4 |
Electric intake valve timing control module |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
P34C8 |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
||
|
-- |
-- |
x |
x |
x |
-- |
||||
|
U012E U042F |
Engine communication |
-- |
-- |
x |
x |
-- |
-- |
ECM stops the electric valve timing control. (The camshaft returns to the position of most retard angle.) |
|
|
-- |
-- |
x |
x |
x |
-- |
||||