ADAS Control Unit Input/Output Signal Item
ADAS control unit receives signals via CAN communication. It also detects vehicle conditions that are necessary for Blind Spot Warning control.
Input Signal Item
|
Transmit unit |
Signal name |
Description |
||
|
TCM |
CAN communication |
Shift selector position signal |
Receives a shift selector position. |
|
|
ABS actuator and electric unit (control unit) |
CAN communication |
Vehicle speed signal (ABS) |
Receives wheel speeds of four wheels. |
|
|
BCM |
CAN communication |
Turn indicator signal |
Receives an operational state of the turn signal lamp and the hazard lamp. |
|
|
Dimmer signal |
Receives ON/OFF state of dimmer signal. |
|||
|
Combination meter |
CAN communication |
System selection signal |
Receives a selection state of each item in "Driver Assistance" selected through the vehicle information display. |
|
|
Side radar LH, RH |
ITS communication |
Vehicle detection signal |
Receives vehicle detection condition of detection zone. |
|
Output Signal Item
|
Reception unit |
Signal name |
Description |
||
|
Combination meter |
CAN communication |
BSW indicator signal |
Transmits a BSW indicator signal to turn ON the BSW indicator on the combination meter. |
|
|
Side radar LH, RH |
ITS communication |
Blind Spot Warning indicator signal |
Transmits a Blind Spot Warning indicator signal to turn ON the Blind Spot Warning indicator. |
|
|
Blind Spot Warning indicator dimmer signal |
Transmits a Blind Spot Warning indicator dimmer signal to dim Blind Spot Warning indicator. |
|||
|
Vehicle speed signal |
Transmits a vehicle speed that is calculated by the ADAS control unit. |
|||
|
Warning system buzzer |
Warning buzzer signal |
Activates warning system buzzer. |
||