DTC Detection Logic
The heated oxygen sensor 2 has a much longer switching time between rich and lean than the air fuel ratio (A/F) sensor 1. The oxygen storage capacity of the three way catalyst (manifold) causes the longer switching time.
MALFUNCTION A
To judge the malfunctions of heated oxygen sensor 2, ECM monitors whether the voltage is unusually high during the various driving condition such as fuel-cut.
MALFUNCTION B
To judge the malfunctions of heated oxygen sensor 2, ECM monitors whether the minimum voltage of sensor is sufficiently low during the various driving condition such as fuel-cut.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|||
|
P0136 |
00 |
O2 sensor bank 1 sensor 2 (O2 Sensor Circuit Bank 1 Sensor 2) |
A |
Diagnosis condition |
-- |
|
Signal (terminal) |
Heated oxygen sensor 2 signal |
||||
|
Threshold |
An excessively high voltage from the sensor is sent to ECM |
||||
|
Diagnosis delay time |
-- |
||||
|
B |
Diagnosis condition |
-- |
|||
|
Signal (terminal) |
Heated oxygen sensor 2 signal |
||||
|
Threshold |
The minimum voltage from the sensor is not reached to the specified voltage |
||||
|
Diagnosis delay time |
-- |
||||