Data Monitor
|
Monitored item [Unit] |
ALL SIG (ICC) |
MAIN SIG (ICC) |
MAIN SIG (LDW/I-LI) |
MAIN SIG (BSW/BSI) |
Description |
|
|
MAIN SW [On/Off] |
x |
x |
x |
x |
Indicates [On/Off] status as judged from ICC steering switch |
|
|
SET/COAST SW [On/Off] |
x |
x |
Indicates [On/Off] status as judged from ICC steering switch |
|||
|
CANCEL SW [On/Off] |
x |
x |
Indicates [On/Off] status as judged from ICC steering switch |
|||
|
RESUME/ACC SW [On/Off] |
x |
x |
Indicates [On/Off] status as judged from ICC steering switch |
|||
|
DISTANCE SW [On/Off] |
x |
Indicates [On/Off] status as judged from ICC steering switch |
||||
|
CRUISE OPE [On/Off] |
x |
x |
Indicates whether controlling or not (ON means "controlling") |
|||
|
BRAKE SW [On/Off] |
x |
x |
x |
x |
Indicates [On/Off] status as judged from brake pedal position switch signal (ECM transmits brake switch signal through CAN communication) |
|
|
STOP LAMP SW [On/Off] |
x |
x |
x |
x |
Indicates [On/Off] status as judged from stop lamp switch signal (ECM transmits stop lamp switch signal through CAN communication) |
|
|
IDLE SW [On/Off] |
x |
Indicates [On/Off] status of idle switch read from ADAS control unit through CAN communication (ECM transmits On/Off status through CAN communication) |
||||
|
SET DISTANCE [Short/Mid/Long] |
x |
x |
Indicates set distance memorized in ADAS control unit |
|||
|
CRUISE LAMP [On/Off] |
x |
x |
Indicates [On/Off] status of MAIN switch indicator output |
|||
|
OWN VHCL [On/Off] |
x |
Indicates [On/Off] status of own vehicle indicator output |
||||
|
VHCL AHEAD [On/Off] |
x |
Indicates [On/Off] status of vehicle ahead detection indicator output |
||||
|
ICC WARNING [On/Off] |
x |
Indicates [On/Off] status of ICC system warning lamp output |
||||
|
VHCL SPEED SE [km/h] or [mph] |
x |
x |
x |
x |
Indicates vehicle speed calculated from ADAS control unit through CAN communication [ABS actuator and electric unit (control unit) transmits vehicle speed signal (wheel speed) through CAN communication] |
|
|
SET VHCL SPD [km/h] or [mph] |
x |
x |
Indicates set vehicle speed memorized in ADAS control unit |
|||
|
BUZZER O/P [On/Off] |
x |
Indicates [On/Off] status of ICC warning chime output |
||||
|
THRTL SENSOR [deg] |
x |
x |
NOTE:
This item is displayed, but it is not monitored
|
|||
|
ENGINE RPM [RPM] |
x |
Indicates engine speed read from ADAS control unit through CAN communication (ECM transmits engine speed signal through CAN communication) |
||||
|
WIPER SW [OFF/LOW/HIGH] |
x |
Indicates wiper [OFF/LOW/HIGH] status (BCM transmits front wiper request signal through CAN communication) |
||||
|
BA WARNING [On/Off] |
x |
Indicates [On/Off] status of AEB indicator lamp output |
||||
|
STP LMP DRIVE [On/Off] |
x |
x |
Indicates [On/Off] status of brake hold drive signal |
|||
|
D RANGE SW [On/Off] |
x |
Indicates [On/Off] status of "D" or "M" positions read from ADAS control unit through CAN communication; ON when position "D" or "M" (TCM transmits shift position signal through CAN communication). |
||||
|
NP RANGE SW [On/Off] |
x |
Indicates shift position signal read from ADAS control unit through CAN communication (TCM transmits shift position signal through CAN communication) |
||||
|
PKB SW [On/Off] |
x |
Parking brake switch status [On/Off] judged from the parking brake switch signal that ADAS control unit readout via CAN communication is displayed (combination meter transmits the parking brake switch signal via CAN communication) |
||||
|
PWR SUP MONI [V] |
x |
x |
Indicates IGN voltage input by ADAS control unit |
|||
|
THRTL OPENING [%] |
x |
x |
x |
Indicates throttle position read from ADAS control unit through CAN communication (ECM transmits accelerator pedal position signal through CAN communication). |
||
|
GEAR [1, 2, 3, 4, 5, 6, 7] |
x |
x |
Indicates CVT gear position read from ADAS control unit through CAN communication (TCM transmits current gear position signal through CAN communication) |
|||
|
MODE SIG [OFF, ICC, ASCD] |
x |
Indicates the active mode from ICC or ASCD [conventional (fixed speed) cruise control mode] |
||||
|
SET DISP IND [On/Off] |
x |
Indicates [On/Off] status of SET switch indicator output |
||||
|
DYNA ASIST SW [On/Off] |
x |
x |
Indicates [On/Off] status as judged from ICC steering switch signal (ECM transmits ICC steering switch signal through CAN communication) |
|||
|
LDW SYSTEM ON [On/Off] |
x |
Indicates [On/Off] status of LDW system |
||||
|
LDW ON INDICATOR [On/Off] |
Indicates [On/Off] status of LDW system display output |
|||||
|
LDP ON IND [On/Off] |
x |
Indicates [On/Off] status of I-LI system display output |
||||
|
LDP SYSTEM ON [On/Off] |
x |
Indicates [On/Off] status of I-LI system |
||||
|
STATUS signal [Stnby/Warn/Cancl/Off] |
x |
Indicates a control state of I-LI system |
||||
|
Turn signal [OFF/LH/RH/LH&RH] |
x |
x |
Indicates turn signal operation status read from ADAS control unit through CAN communication (BCM transmits turn indicator signal through CAN communication) |
|||
|
LDP SELECT [On/Off] |
x |
x |
x |
x |
Indicates an ON/OFF state of I-LI system. I-LI system can be set to ON/OFF by selecting "Driving Aids" → "Lane" of the integral switch |
|
|
LDW SELECT [On/Off] |
x |
x |
x |
x |
Indicates an ON/OFF state of the LDW system. The LDW system can be set to ON/OFF by selecting "Driving Aids" → "Lane" of the integral switch |
|
|
BSW SELECT [On/Off] |
x |
x |
x |
x |
Indicates an ON/OFF state of the BSW system. The BSW system can be set to ON/OFF by selecting "Driving Aids" → "Blind spot" of the integral switch |
|
|
BSW/BSI WARN LMP [On/Off] |
x |
Indicates [On/Off] status of Blind Spot warning malfunction |
||||
|
BATTERY CIRCUIT OFF [On/Off] |
NOTE:
The item is displayed, but it is not used
|
|||||
|
LDP WARNING INDICATOR [On/Off] |
x |
Indicates [On/Off] status of I-LI warning display (Yellow) output |
||||
|
LDW ON INDICATOR [On/Off] |
x |
Indicates [On/Off] status of LDW system ON display output |
||||
|
LDW WARNING INDICATOR [On/Off] |
x |
Indicates [On/Off] status of LDW system warning display output |
||||
|
ITS SETTING ITEM (LDP) [On/Off] |
x |
x |
x |
x |
Indicates the presence or absence of I-LI system. |
|
|
ITS SETTING ITEM (BSI) |
x |
x |
x |
x |
Indicates the presence or absence of Blind Spot Intervention system. |
|
|
BSW ON INDICATOR [On/Off] |
x |
Indicates [On/Off] status of BSW system ON display output |
||||
|
FUNC ITEM (FEB) [On/Off] |
Indicates systems which can be set to ON/OFF by selecting "Driver Assistance" → "Emergency Brake" of the combination meter |
|||||
|
FEB SELECT [On/Off] |
Indicates an ON/OFF state of the AEB system. The AEB system can be set to ON/OFF by selecting "Driver Assistance" → "Emergency Brake" of the combination meter |
|||||
|
FEB SW [On/Off] |
NOTE:
The item is displayed, but it is not used
|
|||||
|
FEB SW OPE [On/Off] |
x |
NOTE:
The item is displayed, but it is not used
|
||||
|
FEB SW IND [On/Off] |
x |
NOTE:
The item is displayed, but it is not used
|
||||
|
Door open condition [On/Off] |
x |
Indicates [On/Off] status of door open condition |
||||
|
Driver's seat belt condition [On/Off] |
x |
Indicates [On/Off] status of driver's seat belt buckle switch |
||||
|
STRG assist select condition [On/Off] |
x |
Indicates [On/Off] status of steering assist system |
||||
|
Parking brake holding request [On/Off] |
x |
Indicates [On/Off] status of parking brake holding request |
||||
|
Parking brake release request [On/Off] |
x |
Indicates [On/Off] status of parking brake release request |
||||
|
EPS Control request [On/Off] |
x |
Indicates [On/Off] status of EPS control request |
||||
|
Pro Pilot ON/OFF request [On/Off] |
x |
Indicates [On/Off] status of ProPILOT Assist request |
||||
|
EPS ST angle command value [deg] |
x |
Indicates [deg] of EPS ST angle command value |
||||
|
EPS mode switching request [mode1/mode2] |
x |
Indicates [On/Off] status of steering angle switching request signal |
||||
|
RAB warning lamp (operation) [on/off] |
Indicates [On/Off] status of RAB system warning indicator. |
|||||
|
RAB warning lamp (malf) [on/off] |
Indicates [On/Off] status of RAB system warning light. |
|||||