Chassis Control Module (With Built in Steering Angle Sensor)
WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
The Chassis control module (with built in steering angle sensor) sends a signal to ABS actuator and electric unit (control unit) via CAN communication:
- Steering angle sensor malfunction signal
- Steering wheel rotation amount
- Steering wheel rotation angular velocity
- Steering wheel rotation direction
- Intelligent trace control signal
- Component function within the system
Chassis control module, according to the signals from each sensor, each switch, and each control unit, controls automatic brake hold.
- Individual component function
- Transmits automatic brake hold activation request signal and automatic brake hold deactivation request signal to ABS actuator and electric unit (control unit).
- Transmits electric parking brake signal to ABS actuator and electric unit (control unit) and electric parking brake control module.