Re/Programming, Configuration

WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Configuration includes the following functions:

Function		Description
Read/Write Configuration	Before replacing ECU	Allows the reading of vehicle specification (Type ID) written in ABS actuator and electric unit (control unit). Allows the reading of vehicle specification (Type ID) store in CONSULT.
	After replacing ECU	Allows the writing of vehicle information (Type ID) stored in CONSULT into the ABS actuator and electric unit (control unit).
Manual Configuration		Allows the writing of vehicle specification (Type ID) into the ABS actuator and electric unit (control unit) by hand.