Work Procedure
WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
- Always perform the radar alignment aiming adjustment after removing and installing or replacing the distance sensor (ICC sensor).CAUTION: The system does not operate normally unless the distance sensor (ICC sensor) is aligned properly.
- Perform the ICC system action test to check that the ICC system operates normally.
Work Procedure
- RADAR ALIGNMENT ADJUSTMENT
Adjust the radar alignment. Refer to Work Procedure .
GO TO 2.
- ICC SYSTEM ACTION TEST
- Perform the ICC system action test. Refer to Work Procedure .
- Check that the ICC system operates normally.
Inspection End.