Work Procedure

WARNING: This page is about a different car, the 2020 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

SAVING VEHICLE SPECIFICATION
WITH CONSULT

Perform "READ CONFIGURATION" to save or print current vehicle specification.

Is vehicle specification saved normally?

YES

GO TO 2.

NO

GO TO 4.
REPLACE ADAS CONTROL UNIT
Replace ADAS control unit. Refer to Removal and Installation .

GO TO 3.
WRITING VEHICLE SPECIFICATION
WITH CONSULT

Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.

GO TO 6.
REPLACE ADAS CONTROL UNIT
Replace ADAS control unit. Refer to Removal and Installation .

GO TO 5.

WRITING VEHICLE SPECIFICATION

WITH CONSULT

Select "WRITE CONFIGURATION - Manual selection" and write in the following list at a ADAS control unit depending on a vehicle specification.

Setting item
Items	Setting value
FWD/AWD	FWD
	AWD
LANE DEPARTURE PREVENTION	WITHOUT
	WITH

GO TO 6.

OPERATION CHECK
Confirm that each function controlled by ADAS control unit operates normally.

WORK END.