LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2021 >> Altima SL, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTC/Circuit Diagnosis) >> DTC Diagnosis >> EPS/DAST 3 (EPS Control Unit) >> DTC C1602: No Tuning Set >> DTC Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Diagnosis Procedure

  1. PROGRAMMING OF EPS CONTROL UNIT 

    Perform programming of the EPS control unit. Refer to Work Procedure .

    GO TO 2

  2. PERFORM SELF DIAGNOSTIC RESULT 

    SYMBOL CONSULT

    1. Ignition switch OFF to ON.
    2. Erase "Self Diagnostic Result" mode of "EPS/DAST 3".
    3. Ignition switch OFF and wait for at least 10 seconds.
    4. Ignition switch OFF to ON.
    5. Select "Self Diagnostic Result" mode of "EPS/DAST 3".
    NOTE: Replace the EPS control unit even if other DTCs are displayed along with "C1602" in self-diagnosis for "EPS/DAST 3".

    Is DTC detected?

    YES

    EPS control unit is malfunctioning. Replace EPS control unit. Refer to EPS CONTROL UNIT : Removal & Installation .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals