Self Diagnostic Result
Refer to DTC Index .
When "CRNT" is displayed on "self-diagnosis result"
- The system is presently malfunctioning.
When "PAST" is displayed on "self-diagnosis result"
- System malfunction in the past is detected, but the system is presently normal.
Freeze frame data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
|
Item name |
Indication/Unit |
Display item |
|
Odometer/Trip meter |
km |
Total mileage (Odometer value) of the moment a particular. |
|
DTC LOCAL CODE |
-- |
Displays but not used. |
|
IGN VOLT |
V |
Displays the ignition power supply voltage. |
|
FR WHEEL SPEED |
RPM |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
RPM |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
RPM |
Displays the rotational speed of rear RH tire. |
|
RL WHEEL SPEED |
RPM |
Displays the rotational speed of rear LH tire. |
|
ACCELE PEDAL POSITION |
% |
Displays the accelerator pedal position. |
|
SHIFT POSITION |
-- |
Displays the shift position. |
|
PRESS SENSOR |
bar |
Displays the brake fluid pressure. |
|
VDC |
INACT / ACTIVE |
Displays the VDC function status. |
|
VDC MALF |
Off / On |
Displays the VDC malfunction status. |
|
VDC OFF SWITCH |
Off / On |
Displays the VDC OFF status. |
|
Buckle SW |
Off / On |
Displays the seat belt buckle switch (driver side) status. |
|
VDC (ABH active) |
Possible / Impossi |
Displays the automatic brake hold active status at ABS actuator and electric unit (control unit). |
|
ABH (CCM) |
Off / On |
Displays the brake hold status at automatic brake hold from chassis control module (with built in steering angle sensor). |
|
Slope |
Slow / Steep |
Displays the slope status. |
|
PB active request (VDC) |
REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module from ABS actuator and electric unit (control unit). |
|
CCM (VDC) |
Normal / Ab normal |
Displays the chassis control module (with built in steering angle sensor) status detected by ABS actuator and electric unit (control unit). |
|
PB active request (CCM) |
REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module from chassis control module (with built in steering angle sensor). |
|
PB SW |
Off / Release |
Displays the parking brake switch status. |
|
ABH active request (CCM) |
REQ / NO REQ |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from chassis control module (with built in steering angle sensor). (When Vehicle stopped by driver's brake) |
|
ABH malfunction |
Normal / Ab normal |
Displays the automatic brake hold status. |
|
ABH indicator lamp |
Off / On 1 / On 2 |
Displays the automatic brake hold indicator lamp status. |
|
ABH active request (ADAS) 1 |
REQ / NO REQ |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from ADAS control unit. (When Vehicle stopped by driver's brake) |
|
PB |
RLS 1 / RLS 2 / APP 1 / APP 2 |
Displays the electric parking brake status. |
|
CCM (PB) |
Normal / Ab normal |
Displays the chassis control module (with built in steering angle sensor) status detected by electric parking brake control module. |
|
PB (ABH active) |
Possible / Impossi |
Displays the automatic brake hold active status at electric parking brake control module. |
|
PB malfunction status |
Normal / ABN 1 / ABN 2 / Not used] |
Displays the electric parking brake status. |
|
ABH active request (ADAS) 2 |
INACT / ACTIVE |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from ADAS control unit. (When Vehicle stopped by driver's brake) |
|
ABH active request (ADAS) 3 |
REQ / NO REQ |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from ADAS control unit. (When Vehicle stopped by driver's brake) |
|
ADAS |
Normal / Ab normal |
Displays the ADAS control unit status. |
|
ABH (ADAS) |
INACT / ACTIVE |
Displays the brake hold status at automatic brake hold from ADAS control unit. |
|
ABH SW |
Off / On |
Displays the automatic brake hold switch status. |
|
ABH SW indicator lamp |
Off / On |
Displays the automatic brake hold switch indicator status. |
|
ABH active judge (CCM) |
OK / NG |
Displays the judgement of automatic brake hold active states. |