Work Procedure

CHECK ANTI-PINCH FUNCTION
1. Close the door.
2. Fully open the door window.
3. Place a piece of wood near fully closed position.
4. Close door glass completely with AUTO-UP.
5. Check the following conditions
  - Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
  - Check that glass does not rise when operating the power window main switch while lowering.
CAUTION:
- Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
- Check that AUTO-UP operates before inspection when system initialization is performed.
- Never check with hands and other body parts because they may be pinched. Never get pinched.
- Finish initial setting. Otherwise, next operation cannot be performed.
  1. Auto-up operation
  2. Anti-pinch function
END