DTC Confirmation Procedure
- CHECK SELF-DIAG RESULT
CONSULT
- Ignition switch ON.
- Select "Self Diagnostic Result" mode of "AIR BAG".
- Check DTC.
Is the DTC detected?
YES
Refer to:
- B00A0-02, -04 or -93: Diagnosis Procedure (B00A0-02, -04 or -93)
- B00A0-09: Diagnosis Procedure (B00A0-09)
- B00A0-83, -86, -87 or -88: Diagnosis Procedure (B00A0-83, -86, -87 or -88)
YES
GO TO 2.
NO
Inspection End.
- ERASE SELF-DIAG RESULT
Erase the DTC.
Can the DTC be erased?
YES
Inspection End.
NO
Refer to:
- B00A0-02, -04 or -93: Diagnosis Procedure (B00A0-02, -04 or -93)
- B00A0-09: Diagnosis Procedure (B00A0-09)
- B00A0-83, -86, -87 or -88: Diagnosis Procedure (B00A0-83, -86, -87 or -88)
- CHECK SELF-DIAG RESULT
- Ignition switch ON.
- Check the air bag warning lamp status. Refer to SRS Operation Check .
NOTE: SRS does not enter the diagnosis mode if no malfunction is detected in the user mode.Is the DTC detected?
YES
Refer to:
- B00A0-02, -04 or -93: Diagnosis Procedure (B00A0-02, -04 or -93)
- B00A0-09: Diagnosis Procedure (B00A0-09)
- B00A0-83, -86, -87 or -88: Diagnosis Procedure (B00A0-83, -86, -87 or -88)
NO
Inspection End.